Ibanez EHB1005 Bass Guitar
With the bass held in the playing position, there are two stacked knobs towards the end of the body, near the input jack. The top control of the stacked knobs closest to the lowest edge of the body is the treble boost/cut, and the bottom knob is the bass boost/cut. The top control of the stack next to the mini switch is the mid boost/cut, and the lower knob is the mid frequency sweep. There are two small knobs along the lower edge of the body. The knob closest to the neck is the volume knob, and the knob between the volume control and the stacked knobs is the pickup balancer. Positioned above these knobs is the EQ bypass. When the switch is in neck position, the EQ is off. When the switch is in bridge position, the EQ is on. When EQ is off, the treble boost/cut knob functions as a passive tone control.
Features
- Ergonomic body design
- Slanted body back
- Comfortably rounded body edge, Chambered body
- Scooped cut on the body back
- 5pc Roasted Maple/Walnut neck w/Graphite reinforcement rods
- Luminescent side dot inlays
- Vari-Mid 3-Band EQ w/EQ bypass switch
- MR5HS mono rail bridge w/string spacing adjustable saddles
- Schaller S-Locks strap pins and Neutrik locking jack
- Detachable Finger ramp
Specification
- neck type: EHB55pc Roasted Maple/Walnut neck w/Graphite reinforcement rods
- top/back/body: American Basswood body
- fretboard: Roasted Birdseye Maple fretboardOff-set Abalone dot inlay
- fret: Medium Stainless Steel frets
- number of frets: 24
- bridge :MR5HS bridge
- string space: 18mm
- neck pickup: Bartolini® BH2 neck pickupPassive
- bridge pickup: Bartolini® BH2 bridge pickupPassive
- equaliser: Vari-mid 3-band EQ w/ EQ bypass switch (passive tone control on treble pot)
- factory tuning: 1G,2D,3A,4E,5B
- strings: D'Addario® EXL165 + .130
- string gauge: .045/.065/.085/.105/.130
- hardware color: Black
