Representing over two years of research, development and field testing, Sontronics DM-1B for kick drum and our pencil condensers (DM-1T for tom and DM-1S for snare) take Sontronics further into application-specific miking.
The DM-1B is a large-diaphragm, end-fire condenser microphone that has been designed specifically to capture and reproduce the various characteristics of a kick drum: the beater click, the heavy thump, the boomy decay and so on.
Sontronics DM-1B has a switchable -15dB pad that allows the microphone to deal with a whopping 155dB, and its sturdy build plus the aluminium flightcase mean it will perform equally well in the studio and in live applications.
The DM-1B and our other drum mics were all tested to destruction before launch, by various session drummers, live musicians and producers, including Flood (U2, Killers, Arctic Monkeys) who found that the DM-1B also gives excellent results on bass instruments, especially bass guitar cabs.
For a kick drum or bass instrument stand that stands out in the mix and is comparable to that offered by mics costing up to ten times the price, the Sontronics DM-1B is the obvious choice.
Features
- large-diaphragm end-fire condenser mic for kick drum and bass instruments
- supplied with its yoke-style shockmount in a sturdy aluminium flightcase
- road-tested by producers Flood, Alan Moulder and Mark Rankin
- covered by Sontronics LIFETIME WARRANTY
- ideal for kick drum but also gives fantastic results on other bass instruments especially bass guitar cabs
Specifications
- Polar pattern: Cardioid (end-fire)
- Frequency response: 20Hz - 20kHz
- Pad: 0, -15dB
- Sensitivity: 6mV/Pa -45dB ±1dB (0dB = 1V/Pa @ 1,000Hz)
- Impedance: 200 Ohms
- Equivalent noise level: 14dB (A-weighted)
- Max SPL (for 0.5% THD @ 1,000Hz): 155dB (with -15dB pad switched in)
- Power source: Phantom power 48V ±4V
- Connector: Three-pin XLR
- Supplied with: Alumnium flightcase
